Operation and Setting of the Di2 remote switch Interface

January 14, 2015

Features

The Shimano Di2 remote switch system can be used to control functions on the CycloComputer.
The left and right buttons on the Shimano Di2 remote switch system can be used with short and long pushes to control functions on the Cyclocomputer.

About the Di2 remote switch system

DURA-ACE 9070

・Wireless Transmitter Unit

SM-EWW01

・E-tube Cable

EW-SD50

・Version

The Di2 Master Unit (SM-BMR1、SM-BMR2、SM-BTR2) cannot be used if the software version is lower than 3.0.5. Please update the Di2 Master Unit to version 3.0.5 or higher.

The Di2 Wireless Unit (SM-EWW01) cannot be send Di2 remote switch signals if the software version is lower than 3.0.3. Please update the Di2 Wireless Unit to version 3.0.3 or higher.

・How to confirm the version and update

It is possible to check the version and update the Di2 System using the E-tube Project application from the website below.
http://e-tubeproject.shimano.com/
The Di2 System can be connected to your PC using the SM-PCE1 or SM-BCR2.
Also, your bicycle Dealer should be able to check the version and update the Di2 System for you.

CA500 Operation

Change gears to activate the Di2 System.
From the [Sensor] Menu, select [Connect New Sensor] to enter the New Sensor Menu.
Select the Device Type [Shimano Di2] and press [Search]. The connection should complete automatically.

It is possible to assign commands to short and long pushes of the left and right switches of the Shimano Di2.
These can then be used to control functions on the Cyclocomputer from the Di2 remote switch system.
The following item appears in the setting menu.
[Setting] - [Device] - [Di2 Remote Switch]
Select one from [Single Click Right], [Single Click Left], [Long Press Right], [Long Press Left], then select the function to assign to it.

The functions that can be assigned are as follows;

[Logging Start / Stop]

Start and Stop the logging of a Workout.
This is the same function as the short push of the Start/Stop button on the Cyclocomputer.

[Lap]

Mark a Lap during a Workout.
This is the same function as the short push of the Lap button on the Cyclocomputer.

[Scroll to the Right Page]

Scroll the screen to the right.

[Scroll to the Left Page]

Scroll the screen to the left.

[Press Menu Button]

This is the same function as the short push of the Menu button on the Cyclocomputer.

[Press and Hold Menu Button]

This is the same function as the Long push of the Menu button on the Cyclocomputer.

[Disable]

This gives the switch no functionality.